Small flow rate single Cartridge Filter Housing for chemical water treatment with CE

High Flow Rate Filter Cartridge

U - JM - DY high flow rate precision filter adopts special filter, filter combined with many years of industry experience and the design and manufacture, can in the system design of compact maximize traffic, compared with the traditional filtering system, this series of large flow filter has more advantages.

DY series filter with large flow filter, filter using 30 meters core wrinkle technology will filter yuan compressed into one unit, make the flow of a single filter up to 50 t/H, with large carrying capacity, at the same time, also sufficient to reduce the maintenance cost of the late filter operation.

On this basis, the same conditions of flow can choose fewer filter, so as to reduce the filter size, compared with competitive products of cartridge, cartridge of space for other half.Compact system design saves valuable space for the factory.In later maintenance, workers will be more convenient operation, so the budget of the investment will be an advantage from the entire device.

Technical parameters:

Design criteria: refer to GB 150-2011

Design pressure: 0 ~ 1.6 MPa;

The gasket material: teflon, fluorine rubber, silicone rubber, nitrile butadiene rubber, etc.

Shell material: 304/316 l, non-standard design (CS liner PO, etc.);

Filtration efficiency: 99.99%;

Filtration precision, 0.1 ~ 200 um;

Working temperature: 20 ~ 110 ℃.

Optional filter: PP folding, glass fiber folding, PES folded, PTFE fold, stainless steel sintered felt fold, titanium rods, etc.