Payment & Shipping Terms:
|Product Name:||Bag Filter||Application:||Drinking Water|
|Inlet & Outlet Diameter:||1 To 8 Inch||Flow Rate:||10 To 800 M3/Hr|
|Material:||SUS 304/316/316L||Connection Mode:||Flange|
|Working Temperature:||0~250 ℃||Filtration Degree:||0.5~1000 Micron|
automatic water filter,
Industrial Bag Filter
Parallel Stainless Steel Bag Filter Housings , Cartridge Filter Housing Bag Filter
Mufti-Round Series of Liquid Bag Housings range from our 2 basket to our 17 basket housing design
upon the needed surface area and volume of fluid to be filtered.
Carbon 304 or 316 stainless steel material
10 bar (150 psi) pressure rating
Low pressure drop
Davit cover lift closure with swing bolts
Buna seals - lid & basket
Differential, drain and vent ports
Heavy-duty support legs
316 stainless steel strainer baskets
2-part epoxy finish on carbon vessels
Bearing assisted davit assembly
Structure and working principle
Bag type filter is a pressure filtration device, which is mainly consists of filtration cylinder, cylinder cover and fast open structure, stainless steel strengthen filtration bag, and etc. When filtrate flows from side entrance of filter shell into the pipe bag, the bag itself is installed inside the enhanced basket, liquid penetrates bag with required fineness grade that can be provided with qualified filtrate, impurities and particles were intercepted by bag. It is very easy to replace the filter-bags, there is hardly no material to be consumed.
The multi-round vessels effectively remove dirt, pipe scale, and other contaminants from process liquids such
as water, chemical and petroleum products. Quality construction and design assure protection for all
VESSEL CONSTRUCTION: The multi-round vessels are designed for operating up to 10 bar (150 psi) at 149° C
(300° F). The housing design provides a large sump area at the bottom of the basket for particulate accumulation.
This design utilizes the filter more efficiently and prolongs the element life.
The 316 SS baskets seal onto a buna o-ring to eliminate particulate bypass between the basket and seat.
Optional mesh-lined strainer baskets and o-rings are available.
A vent in the housing lid and a drain port in the housing speed evacuation and filling. Gauge ports are located on
the body of the housing to install gauges for monitoring the differential pressure across the bag. Permanently
piped housings are opened with simple tools without disturbing the piping. Swing bolts with eye-nuts allow easy
opening and closing of the swing-lid. No need to remove any hardware.
As a standard finish, all vessels are blast cleaned and painted inside and out with a 2-part epoxy. Stainless steel
vessels are supplied with a satin finish.
- ASTM SS304 or SS316 stainless steel iron construction for best chemical compatibility and corrosion resistance.
- Two styles of surface finish (both inside and outside): Mirror-polish or Bead blasted
- Patent design to prevent bypass leakage.
- Multi-choice of seal material to meet different needs: Silicon rubber, EPDM rubber, Viton rubber;
- 150 PSI (1.0Mpa) pressure available
- Standardised flanges and threads: DIN, BSP, ANSI
- Micron Ratings: 1-100micron
- Custom designs available.
Accessories included: air release valve, pressure gauge and one 5 micron bag filter
Packaging: carton or wooden case
· Process water Filtration
· Plating Solutions
· Hydraulic Fluids
· Ground Water Remediation
· Industrial Waste Water Treatment
01. What is the capacity (m3/hour)you required for this equipment?
02. What is the material for this bag filter?
Stainless steel (SS304/SS316)?
03. What is the working pressure for it?
04. What is the filtration degree?
10 micron or 200 micron?
technical parameters of bag filter
|model and specification||filtration area(SQM/m2)||quantity of filtration bag||diameter of inlet and outlet(mm)||